ADS-B OUT | SIMPLIFIED
> TSO’d 1090 ES Transponder
> Built-in WAAS GPS (antenna included)
> Portable ConnectTM
Enhance your Receiver’s Reception with Portable Connect
Designed with the common 1.65″ tall form factor, it’s an easy replacement for your existing transponder. Here’s what to consider for install time:
1. Replace old transponder in panel.
2. Install GPS antenna (included in kit).
3. Reuse existing transponder antenna.
4. Reuse existing altitude encoder.
|Bezel Height||1.69 in. (43 mm)|
|Bezel Width||6.38 in. (162 mm)|
|Depth||10.75 in. (273 mm) front of panel to connector backshell|
|Weight||3.29 lbs. (1.49 kg) including rack and connectors|
|Operating Temperature||-20 C to 55 C|
|Storage Temperature||-55 C to 85 C|
|Power Input||9.0 to 36.0 VDC, 15 W typical|
|Cooling Input||No fan required|
|Software Compliance||DO-178B Level C|
|Hardware Compliance||DO-254 Level C|
|TSO Compliance||C112e (Level 2els, Class 1),
C145d (Class Beta 1 GPS/WAAS),
C166b (Class B1S)
|Transmitter Power||310 WATT|
*The FAA mandate requires all aircraft flying in current Mode-C airspace be equipped with ADS-B Out before 2020 (by 12/31/19).